Maintenance and cleaning of bath and shower faucets

The matching knowledge of bathtub shower faucet

Nowadays, more and more people start to consider whether the style of the faucet is coordinated with the decoration style when purchasing a faucet.

Color selection: The most common faucets on the market are stainless steel chrome plating, and there are some less common faucets with bright colors. Such as bronze, gold. Stainless steel chrome plating is generally based on simple style, bronze color is generally Chinese style, the golden faucet is matched with European style, supporting the extravagance of the whole decoration.

Choice of shape: The handles and outlet pipes of the faucet have various shapes, most of which are streamlined, and various straight or curved faucet shapes can be matched with simple-style decoration. When installing, you need to calculate the installation height of the faucet and shower, so that it can be easily used when bathing.

Maintenance and cleaning of bath and shower faucets

Cleaning of the shower faucet

1. The surface of the faucet should be gently wiped with a soft cloth (without impurities) dipped in detergent. Avoid using wire balls or scouring pads with hard particles. In addition, do not hit with hard objects so as to bruise the surface of the faucet.

2. Use the following cleaners to remove rough masks and buildup: mild liquid glass cleaner, pure liquid glass cleaner, acid-free, non-abrasive soft liquid or fully dissolving powder, non-abrasive solution polish.

3. Never use any abrasive cleaners, cloths, or paper cloths; never use any acid-containing cleaners, polishing abrasives, or rough cleaners.

4. Under the condition that the water pressure is not lower than 0.02mpa (ie 0.2kgf/cm2), after a period of use, if it is found that the water output decreases or even the water heater are turned off, it can be lighted at the water outlet of the faucet. Gently unscrew the screen cover, remove impurities, and generally return to normal.

Maintenance of bathtub shower faucet

1. Before installing the faucet, it is necessary to flush with water, wash the sediment and impurities in the water pipe, go out the debris in the installation hole, and check that the accessories in the box are not mixed with impurities, and the ceramic spool may be played or worn.

2. Use a soft cloth to apply toothpaste to clean the surface, then clean the surface with water. Do not use alkaline cleaners or wipe with scouring pads or steel balls to avoid damage to the electroplating surface.

3. The single-handle faucet should be slowly opened and closed during use; the double-handled faucet should not be closed too tightly, otherwise, the water stopper will fall off, causing the problem that it cannot be closed and the water cannot be stopped.