How to install stainless steel faucet?

1. Preliminary preparations
Before installing the stainless steel faucet, check whether the supporting parts are complete and whether the installation tools are complete. Common stainless steel faucet accessories include hoses, rubber washers, showers, decorative caps, crutches, etc.

2. Clean before installation
Before installing the stainless steel faucet, clean the water pipe, drain the water to clean the sediment and impurities in the pipe, the impurities in the installation hole, etc., and ensure that the accessories in the box are not mixed with impurities, so as not to block the valve core during installation.

3. Left hot water, right cold water
When connecting the stainless steel faucet water pipe, remember that the left is the hot water pipe and the right is the cold water pipe. The distance between the two is 100-200mm. After the water inlet pipe joint is fixed, remove the faucet and wait until the wall plastering is completed. Then install the faucet to prevent the surface coating from being polished.

4. Installation of single-hole faucet
For the single-hole basin faucet, a special angle valve must be selected when installing the stainless steel faucet. The angle valve must be fixed to the hot and cold water pipes out of the wall. If there is a distance between the angle valve and the water pipe on the faucet, you need to purchase a special pipe to lengthen it. If the inlet pipe is too long to exceed the outlet pipe, the part can be cut off as needed. If the angle is not appropriate, it can be bent to the required position appropriately.

Wenling Saige Plumbing Equipment Co, Ltd. is leading China ABS faucets manufacturers and ABS faucets suppliers. Its product types include Angle-valve, Tap, faucet, Basin faucet, Kitchen faucet, Spray gun, Hand shower, Lifting lever, Silicone faucet, Silicone faucet and peripheral configurations. If you want to learn more about Tap related information, please visit Wenling Saige Plumbing Equipment Co, Ltd.