news

Home / News / Industry News / How to install the plastic faucet correctly?

How to install the plastic faucet correctly?

Update:2021-06-18 00:00
Abstract:How to install the plastic faucet correctly?
1. Before installation, you must first prepare related tools, such as glue, saws, wooden sticks, etc. Viscose is used to connect the plastic faucet and the pipe it touches tightly, so that it will not fall off. The wooden stick is used to apply the glue to the position where the plastic faucet should be applied, and the saw is used to adjust its length.
2. Before installing the plastic faucet, it is necessary to remove the impurities and dirt in the pipe to avoid blockage.
3. When installing, first align the threaded connection of the plastic faucet with the pipe to be installed, and then slowly tighten the faucet so that the threaded connection is completely hidden in the pipe. Finally, add glue and do a good job of sealing.
4. After the installation is completed, it cannot be opened and used directly. It should be allowed to stand for a period of time to solidify the glue. Then clean the surface of the plastic faucet to keep it clean and prevent stolen goods from mixing into the water.
5. After the plastic faucet is solidified, check whether it can pass water normally, and then check whether it will drip. If the dripping is normal, you can try it.
6. When using the plastic faucet for the first time, do not apply a lot of force to its switch, just slightly twist the switch. After the trial has no problem, it can be operated normally.
SSZ1001B(White) ABS Plastic Water Tap
Wenling Saige Plumbing Equipment Co, Ltd. is leading China ABS faucets manufacturers and ABS faucets suppliers. Its product types include Angle-valve, Tap, faucet, Basin faucet, Kitchen faucet, Spray gun, Hand shower, Lifting lever, Silicone faucet, Silicone faucet and peripheral configurations. If you want to learn more about Tap related information, please visit Wenling Saige Plumbing Equipment Co, Ltd.