Water-saving faucet refers to a ceramic sheet-sealed faucet that meets the regulations. The so-called water-saving is relative to the cast iron spiral-lifting faucet. The water-saving effect is very limited. The purpose of the water-saving faucet is to solve water saving and prevent water flush Overwhelm other people's problems.
It is mainly composed of upper water pipe, spring, long piston, hydraulic device, short piston, U-shaped pipe, tee, down water pipe, safety valve, foot pedal and three-prong groove.
Its characteristics are: the lower end of the short piston is connected to the upper end of the hydraulic device, the left end of the hydraulic device is connected to the right end of the long piston, the left end of the three-way sleeve is installed on the whole of the safety valve, and the lower part of the safety valve is fixedly installed on the pedal.
At the upper end, the equipment of the plastic factory is used for mass production to meet the needs of the living world. It is also an effective way to install an air stabilizer at the outlet of the faucet, commonly known as a bubble head. The faucet with the bubble head is more water-saving than the faucet without the device, and as the water pressure increases, the water-saving effect is also More obvious.
Due to air injection and pressure, the water beam of the water-saving faucet appears larger than that of the traditional faucet, and the water feels smoothly. If you want to further save water, you can also choose some other special faucets, such as sanitary hand washing faucets, delay faucets, etc. The price of these faucets is relatively higher than that of ordinary faucets.